Maintenance Programs

Affordable Maintenance Services That You Can Depend On. We believe in quality service and quality pricing.

Our Goal

To make sure that the equipment you have will continue to be the one that you depend on during those cold Wisconsin winters for years to come.

OUR NO-BREAKDOWN GUARANTEE

Our priority has always been your comfort and 100% satisfaction.

We take the maintenance of your system a step further. Our 30-point inspection is a complete system check.

Call and schedule your appointment today or join our Prime Maintenance program and receive your yearly NO Breakdown Guarantee.

The no breakdown guarantee includes if there is a problem with your HVAC system during the time which you are a member you will not pay any service charge for us to return and diagnose the issue you may be experiencing.

30 Point Furnace Maintenance

• Inspect entire furnace for safety issues
• Inspect heat exchanger and vacuum out minor rust deposits
• Pull Blower assembly or inspect the blower wheel and motor
• Visual inspection of evaporator coil
• Inspect and clean burners
• Vacuum out minor rust around burners
• Check ignition controls
• Clean flame sensor
• Measure temperature rise
• Measure blower amps
• Check blower capacitor
• Inspect flue pipe
• Test main limit switch
• Test flame rollout switches
• Test all Safety controls
• Test gas valve operation
• Check gas connections at furnace
• Check and adjust gas valve pressure (if necessary)
• Test fan control
• Test door switch
• Check and tighten all electrical connections
• Check and tighten low voltage connections
• Measure high voltage to furnace
• Test inducer assembly
• Test pressure switch
• Check thermostat operation
• Inspect ductwork
• Replace standard 1-inch pleated filter
• Update inspection label
• Clean up after completion of tune-up

30 Point Air Conditioning Maintenance

• Inspect entire air conditioning system for safety issues
• Inspect blower assembly, inspect the blower wheel and motor
• Check blower capacitor
• Measure blower amps
• Inspect heat exchanger
• Inspect evaporator coil
• Check refrigerant charge
• Tighten all refrigerant service valve caps and covers
• Inspect condenser coil
• Clean out debris from bottom of condenser
• Inspect fan blade
• Flush condensates drain line
• Check all drain safety switches
• Check condensate pump and line (if applicable)
• Measure temperature difference across evaporator coil
• Check low- and high-pressure switches
• Test high voltage at disconnect and condenser
• Check and tighten all electrical connections
• Check and tighten all low voltage connections
• Measure compressor mega ohms
• Measure compressor amps
• Measure fan amps
• Test compressor run and start capacitors
• Check compressor terminal connections
• Check thermostat operation
• Replace standard 1-inch pleated filter
• Inspect ductwork
• Inspect flue pipe
• Update inspection label
• Clean up after tune-up